Muyang steel structure company can provide civil steel structure buildings, tunnel & bridge steel structure, ship and ocean facility steel structure; moreover its steel transport infrastructure is also one of the global market leaders.

Muyang steel structure company now has four stores. There are 13 main shop production bays, with a total area of 47,000 square meters. The target is 170 kg/m, or approximately 8,000 metric tons in full production. In 2012, the company from a variety of mixed-use facility that allows 50% of capacity can produce about 4,000 tons hybrid structural steel per month. At the rate of 10 tons per man, the company now has 400 stuffs. The staffing arrangement is based upon the project sales, so if there is a large project, additional staff will be added to increase output by 1000 tons. In 2013, after the third production base is completed, steel company will be fully up and running.



There are large of successful stories on Muyang steel structure engineering. One is the Nanhai Petrochemical Project which is currently the largest Sino-foreign joint venture project for the petrochemical industry in China. Total Investment in the project was over USD $4.5 billion, making this the single largest foreign investment project in China's petrochemicals industry. The heart of the complex is an 800,000 ton per annum (tpa) ethylene cracker. Other major features of the complex are a 560,000 tpa styrene monomer, a 250,000 tpa propylene oxide plant, a 320,000 tpa mono-ethylene glycol plant, a 240,000tpa polypropylene plant, a linear low density polyethylene/high density polyethylene plant of 300,000 tpa, and a low density polyethylene plant of 150,000 tpa; plus integrated support facilities and utilities.

Muyang steel structure is so well-known in the field of steel construction, and it has a large a share in global, then if you want to get a steel project, you can contact Muyang.

The article is from : http://muyangmachineryshops.blogspot.com/2013/08/nanhai-petrochemical-steel-structure.html

The area on bulk food warehouse shall not exceed the maximum allowable area of 12,000 square meters; the maximum allowable area for each firewall should not exceed 3,000 square meters.

Steel silo and squat silo can be arranged into groups, and total reserves of each group separately were ≤ 40000 ton, 40001-50000 t, 50001 -100,000 ton; while squat silo total reserves of each group were ≤ 50000 t, 50001-1500,000 tons.

Steel or semi-steel bulk food banks on each side of the firewall WAREHOUSE within 6 m of columns, beams, roof load-bearing structural components and building envelope fire protection measures should be taken to its fire resistance, and fire resistance should follow the "architectural design code for fire protection." 2.0.1 Requirement.



Storage silo, squat silo, underground corridor, transit warehouse, and working tower should be taken in accordance with the relevant specification explosion-proof measures.

When the total reserves on silos is more than 40,000 tons, its outdoor fire water should not be less than 45 liters / sec; when the volume of the warehouse is greater than 50,000 cubic meters, its outdoor fire water should not be less than 45 liters / sec. Squat silo’s underground corridor should set water spray system.

When the fire load of the power supply does not meet the two-level above requirements, you can be use the internal combustion engine driven fire pump.

Other fire structure of the grain silo should be designed in accordance with the architectural design of fire protection regulations.

The article is from : http://steelsilos.blogspot.com/2013/08/fireproof-design-on-grain-silo.html

Yangzhou Muyang Group has accomplished over 1000 storage projects in more than 20 Provinces, cities and autonomous regions in China, including the fields of grain, edible oil, haarbor, flour, brewage, chemical industry, feed, building material, environmental protection and so on.

In recent years, the company activates in developing the international markets, and has won the international bids of storage projects many times, and its products are sold far to the countries such as Egypt, Saudi Arabia, Iran, Thailand, India, Japan, Malaysia, Korea, Vietnam and other regions.

Muyang has made large of steel silo projects in China, and it has helped many companies to get more chances in silo careers. Muyang Group has now successfully constructed corn deep-processing projects for China oil and foodstuffs corporation, Xiwang Group, Jilin Fuel Alcohol Company Limited, Yufeng Group of Hebei, Shandong TTCA Biochemistry Co., Ltd, Yanjing Beer Group, and other great projects.



Features of Thermal Insulation Grain Silo

1,Thermal insulation
Grain temperature change gradient inside silos is lower than that outside, thus not likely to have condensation of moisture.

2,Safe grain storage
Storing in a low temperature , increases the grain storage stability, keeps the grain quality and prolongs the safe-storage period.

3,Low fabrication cost
With installing an insulation layer (polyurethane froth, rubber sponge,glass fiber etc.) on the outer wall ,insulation silo can have a low fabrication cost compared to concrete silo.

The article is from:http://steelsilos.blogspot.com/2013/08/muyang-steel-storage-silo.html

(1)Lifting

Because extruder's space is relatively large, and the weight is relatively high, so when lifting, it is suggested that lift all extruder's parts after the demolition of the main components. Its major components can be disassembled into feed conditioner, the host, the main motor and some other parts.

When you lift the extruder's parts, you can't make oppression, collision damage in the whole process of lifting, dismantling and assembling. On the lifting process, rope should be able to withstand the equipment and is not allow too short, so as not to damage the lifting equipment, but we do not require that each rope angle is 60 °, in fact, less than 60 °is better. The equipment's load carrying capacity is greater 1.2 time than the equipment itself.

(2)Transportation

a. When the equipment come out form the factory, you can choose whether you can use the packing box according to the actual situation.
b. If the box is not used, the rain-proof measures should be taken, and transport and equipment should prevent collision and overturning.
c. When using the box, the machine and accessories in the box should be fixed firmly, and with the distance left between the container wall to prevent damage in transit collision.
d. When transporting, the machine can not be reversed and crushed.
e. The equipment can be loaded into a container for transporting.



(3)Inspection

a. When equipment arrives, you should carefully exam whether there is something wrong with the machine.
b. Check the packing list carefully, and count random file attachments, and make unpacking records.

(4)Storage

a. When you place the equipment outdoor, you should have anti-rain, anti-sun and anti-water facilities, indoor storage should be taken good ventilation and moisture-proof measures.
b. Long-term storage, the machine should be placed in ventilated, dry, cool place, and should get rain and moisture facilities, unpainted surfaces should be coated with anti-rust oil leakage.

If you want to buy other machines, like grinding machines, mixing machine, pelleting machines, or you want to get big projects, such as steel structure, steel silo project, you can contact to Muyang.

Muyang Automatic Control Equipment Co., Ltd. is a high-tech enterprise under Muyang Group. With its management concept "People are the first in science and technology", it has brought in lots of senior experts in the field of industrial automatic control, computer application and software development. By the technical improvement and successful implementation in the market, the company, since its founding, has gained the clients' trust and reliance for its solid technical strength, high standardized quality and excellent after-sales service. Now, as the first company in China for desiging and supplying the automatic control systems for feed and grain milling, its prosucts have been not only widely used in the domestic feed, flour and rice mills throughout China but also well exported to overseas market in dozens of countries such as Egypt, Philippines and Malaysia etc.



Scope of Service:

Central automatic control system for a feed mill;
Computer-based interface con meatrol system for a feed mill;
Control panels for grinder, pellet mill, mixer, extruder, coating system in a feed mill;
Central automatic control system for a flour mill;
Central automatic control system for a rice mill;
Central automatic control system for an edible oil mill;
Central automatic control system for a starch plant;
Central automatic control system for a compound fertilizer factory;
Central automatic control system for other industry;
Computerized proportioning system;
Automatic control systems for the bagging machine, intermediate scale, truck scale and level indicator for granular or powdery materials as well as for the temperature measuring systems in warehouses and silos.

Specialized in the research, design, building, and marketing of material storage & handling facilities, Muyang can provide both spiral tyle steel silo and assembly type corrugated silo.

Made by the technology introduced from Switzerland, Muyang spiral steel silo is available in a range of storing capacity from 50T to 7000T, with which diverse bottoms, flat or conic, and various discharging modes can be furnished.

The fabricating technology for assembly type corrugated steel silo comes from the USA. Various spiral steel silos with different bottoms and discharges are available with storing capacity from 10T to 16000T.



As a turkey project contractor, MSEC have successfully built more than 1000 grain silo facilities all over China in the industrial fields of grain, feed and edible oil processing, grain terminal as well as chemical, brewing, building material, environmental protection industries. In recent years, Muyang international steel silo market has been extended to Malaysia, Egypt, Japan, North Korea and Vietnam etc.

The work scope of MSEC includes the design of process flow and civil work, and the turkey project work from design, fabrication, erection up to commissioning for the systems of automatic control, conveying, cleaning, drying, fumigation, cooling and cold storage, ventilation, dust collection, temperature and moisture measurement. Personnel training is also available.

Silos should be built in the place where has convenient transportation, residential buildings and public buildings' dry district, with full possibilities of the water supply, drainage, heating, electricity and connected to other lines. To prevent steel corrosion, the silos should not be set to waterfront places. The design and construction of silo's wall strength should meet the requirements, and also make the silo wall be smooth, easily handling materials, meanwhile the layout should be reasonable in order to save floor space.

The bottom of the mechanized silo has installed unloader funnel, and upper gallery has set a loading's transport equipment. When Loading, unloading pit's Bulk material through ascension machines shipped the supremacy-pass gallery and to unloaded into horizontal leather belt transport planes, belt conveyor will bulk material unloaded into the grain silo. When unloading, bulk material through the discharge funnel unloaded onto the the next-pass gallery, by the horizontal belt conveyor shipped out. In addition, before the grains go into the silo, the grains also need to dry, weigh, turn over warehouse, disinfection and clean. So, the silo should be equipped with corresponding equipment and devices, so as to implement automation operation.



The planar shape of the steel silo has square, rectangular, polygonal, circular and so on. Round silo's wall force reasonably, so you should pay particular attention to the economic use of materials in the foundation investigation and foundation design. When the stores is single species or stocks is small, you should arrange with a separate warehouse. When the stores are of more varieties or large reserves, then you can arrange in groups.

The total length of the cylindrical silo generally is not more than 60 meters, the total length of the square group silos generally are not exceed 40 meters. We should take actions when silos length is too large or the force and the situation is more complex, such as expansion joints to eliminate concrete shrinkage stress and temperature stress impacts.

Why should you choose Muyang as your partner? Muyang Steel Structure Unit is one of the global market leaders for supplying civil steel structure buildings, tunnel & bridge steel structure, ship and ocean facility steel structure, and special steel structure for transportation facilities. Well, Now Muyang Group is here to be so honored to tell you its great adavantages on steel structure engineering.



Resistance to shock:
Mostly low-rise villas' roofs are sloping, so the roof structure is basically made ​​by the cold-formed steel on triangular truss system, light steel structural forms a very strong "plate rib structure system", which has a stronger seismic structural system and the ability to resist horizontal loads for seismic intensity of 8 degrees over the region.

Wind resistance:
Type steel construction is with great advantages, such as light weight, high strength, good rigidity and deformation ability. The weight of buildings is only fifth than brick structure which can resist to 70 meters per second hurricane, so that life and property can be effectively protected.



Durability:
Light steel residential structure is used in cold-formed steel, high-strength cold-rolled steel with super anti-corrosion galvanized plate, effectively avoid corrosion in the construction, increasing the light steel structure's life with 100 years.

Heat insulation:
The heat insulation material is used in glass fiber cotton, with good thermal insulation effect. The wall insulation board effectively prevents the wall of the "cold bridges", to achieve a better insulation effect.



Sound insulation:
Sound proofing is an important indicator of assessing house, light steel systems are installed using hollow glass windows, with great sound insulation. Gypsum board walls' soundproofed effect can be up to 60 decibels.

Health:
Dry-construction can reduce pollution caused by wasting, and house steel material can be 100% recycled, other supporting materials can also be recycled. All materials are green to meet environmental requirements, conducive to health.



Comfort:
Light steel wall is using energy-efficient system, with respiratory function, you can adjust indoor air humidity; roof with a ventilation function that ensure ventilation and cooling requirements.

Cycle Short:
All dry constructions avoid seasonal effects from the environment. A building of about 300 square meters can be completed from the foundation to the renovation with just five workers within 30 days.



The latest addition to Muyang facilities is the new fabrication and testing center located at 2 Huasheng Road, Yangzhou, Jiangsu, China. Also know as the 3rd production center, this 500,000m2 site includes 330,000m2 of covered shops, offices, and parks; with production planned the feed mill engineering company.