All the mechanical equipments produced by Muyang are equipped with safety devices, which are consistent with modern technical level and universally effective safety rules prior to ex works, so that the customers can use the machines in accordance with the regulations. The enterprises are obligated to execute following regulations to guarantee operators' safety.

If the operators employed cannot read or write, the owner has the duty to explain to them clearly where dangers exist and warn them that special attention should be paid. The cleaning, lubricating and oiling of the feed machinery or its parts and components may be carried out only when the machine is stopped. If you must climb on or enter the machine to do such work, the mandatory provisions shall be made without exception: The power supply of motors must be cut off completely and the switch must be locked.

Be careful, sampling from inside the machine can never be carried out unless there is not any danger. Usually, the samples can be taken from the pipe under the machine instead of inside machine. Clear off the deposited dust, dirties and materials frequently. Keeping the machine clean can enhance production safety and the cleaning level of workshop, and is also beneficial to dust explosion prevention.

If oil (grease) leakage occurs, clean it immediately and seal well the place where leakage occurs, for oil or grease leaked on the floor will easily bring about hazards to the operators. In production operation, the feed machine must be equipped with safety devices, which may be neither removed and abandoned nor reduced in functions. Otherwise, we are not responsible for any accidents resulted here from, and reserve the right to ascertain where the responsibility lies.